Asbestos Removal in Texas City, TX

About Asbestos Risk in Texas City

Approximately 32% of housing in Texas predates 1980, the year most asbestos-containing building materials were phased out of residential construction. Homes and commercial buildings built before 1980 in Texas City may contain asbestos in floor tile adhesive, acoustic ceiling texture (popcorn ceilings), pipe insulation, HVAC duct wrap, roofing materials, and joint compound.

• Texas City is a city in Galveston County, Texas, an industrial coastal city in the Houston metro known for its petrochemical and maritime industries; approximately 40% of housing predates 1980, with a high proportion of commercial and industrial structures from the 1950s–1970s.
• Texas DSHS Asbestos Contractor License (25 TAC Chapter 295) and 10-day notification to TCEQ Houston Regional Office required before qualifying renovation or demolition projects.
• Texas City's extensive older industrial commercial buildings along Palmer Highway and Texas Avenue, along with mid-century residential neighborhoods, commonly contain asbestos in pipe insulation, boiler insulation, industrial equipment gaskets, floor tile adhesive, and roofing materials; the petrochemical and refinery sector in Texas City generates significant commercial and industrial abatement work.

Asbestos Removal Cost in Texas City, TX

Cost ranges are estimates based on national survey data (HomeAdvisor). Texas City/Galveston County near national avg; Houston-area market; industrial abatement common given petrochemical heritage. Always obtain multiple written quotes from licensed contractors before authorizing work.

Factors That Affect Cost

• Type and location of material: Pipe insulation and floor tile are typically less expensive to abate than ceiling or wall materials requiring full enclosure.
• Project scope: Whole-home surveys or large commercial projects involve higher mobilization, air monitoring, and disposal costs.
• Disposal fees: Asbestos waste must be double-bagged, labeled, and transported to a licensed disposal facility. Disposal fees vary by county and landfill.
• Clearance air testing: Post-abatement air monitoring is required for most projects and adds to total cost.
• Contractor availability: Limited local contractor supply can increase pricing; allow extra lead time in smaller markets.

Licensing Requirements in Texas

Always verify a contractor's license status directly with Texas Department of State Health Services (DSHS), Asbestos Programs before signing a contract. Federal regulations (29 CFR 1926.1101) require all asbestos abatement supervisors and workers to be trained and accredited under AHERA regardless of state requirements.

Notification Requirements for Texas City

No additional local rules beyond state (25 TAC Chapter 295 (DSHS Asbestos Rules); 30 TAC Chapter 330 (TCEQ); Texas Health and Safety Code Chapter 1954) and federal (40 CFR Part 61 Subpart M) NESHAP requirements are known for Texas City. Verify locally before beginning work.

How to Hire a Contractor in Texas City

1. Confirm licensing. Verify the contractor holds a current Texas asbestos abatement license and appropriate AHERA accreditations for supervisors and workers.
2. Obtain an inspection first. A certified asbestos inspector (separate from the abatement contractor) should sample and test suspect materials before abatement begins.
3. Get written quotes. Request itemized quotes from at least three licensed contractors covering labor, air monitoring, disposal fees, and clearance testing.
4. Verify notification filing. Confirm the contractor will file the required notice with Texas Commission on Environmental Quality (TCEQ), Air Quality Division; Texas City/Galveston County projects notify TCEQ Houston Regional Office at least 10 working days before work begins.
5. Request clearance documentation. Upon project completion, obtain air monitoring results and a written clearance report confirming fiber levels are below applicable action levels.

Frequently Asked Questions — Texas City Asbestos Removal